An AC trying to cool an open terrace wastes power and strains the compressor. A contact sensor on the door tells the system the door is open. After a short delay, so a quick step outside does not trigger it, the AC pauses.

Vaety sets the delay, around one minute, and restores the AC when the door closes. You can enjoy the terrace without worrying about the electricity or generator.

We place the sensor on each balcony or terrace door that matters and adjust the delay to how you use it.

Floors and walls store heat slowly, so heating after the cold arrives means hours of discomfort. Using the weather forecast, the system raises the underfloor heating ahead of a cold front, so the space stays steady.

Vaety links forecast data to your underfloor heating controls. The result is steadier comfort and no cold shock when a storm hits, which suits homes in colder regions.

This needs underfloor heating or a heating system with compatible controls, and an internet connection to receive the forecast. We check your heating first.

Guests often leave the AC running in an empty space. A presence sensor knows when nobody is there, so the AC eases off after a delay and returns when someone comes back. No camera is needed, so guest privacy is respected.

Vaety can pair this with time bound entry codes, so check in and check out happen remotely. Together they cut energy waste and key handling for a rental.

It is good practice to tell guests which sensors exist. Presence sensors only report whether the space is occupied.

On a limited amperage supply, turning on a heater, an AC and a water heater together can trip the breaker. Load management watches what is running and delays or switches off lower priority appliances before the limit is passed.

Vaety is built for this, with power metering per device and rules such as holding the water heater while the heater and AC are on. It also helps in spaces that switch between the grid, a generator and a battery, shifting loads to suit each source.

The limits come from your real breaker and generator, so we measure first and set rules with margin. Our electrician team checks the circuit.

A full battery means extra solar production is lost. Instead of wasting it, the system can trigger a heavy appliance such as a water heater, turning surplus power into stored hot water.

Vaety reads the battery level where your inverter supports it, starts heating at a threshold such as 80 percent, and stops when the level drops. It works like free hot water from energy you already produced.

This needs an inverter or battery system that shares its level with the automation, and a properly rated relay for the heater. We check compatibility first.

During municipal water cuts, you want to know how much water you have left. A sensor on the tank gives a live level, so you can plan usage without checking the roof.

Vaety adds low level alerts and can hold non essential use, such as garden irrigation, when the tank runs low, so the water stays for the space.

Compatible sensors depend on the tank type and access, so we check the tank setup first. Remote viewing from outside needs an internet connection.

A timer waters at the same hour whether it rained or not, so plants drown and water is wasted. Intelligent irrigation checks the weather and the soil before it runs.

Vaety sets rules: hold after rain, extend during a heatwave, skip when the soil is already moist. Combined with a tank sensor, it can also pause when water is short.

Soil moisture sensors need placement in the ground and the valves must be controllable, so we check your irrigation first. Forecast data needs an internet connection.

Water heaters and printers left on all weekend waste power, and electronics are exposed to surges during storms. A smart breaker can cut selected circuits on a schedule.

Vaety sets the schedule to your hours, with an easy override, and keeps essentials such as the fridge or the network on. On a storm night, sensitive equipment can be cut completely.

Cutting the supply helps, but it does not replace surge protection, so for valuable equipment we recommend both.

Power cuts, generator switches and router restarts are routine in Lebanon. If devices needed manual fixing each time, the system would be a burden.

Vaety uses local control and configures the network so devices rejoin on their own once power and Wi-Fi return. We use hardware tested locally for exactly these moments.

Some cheap devices misbehave after outages, which is why we choose from a tested list. If one does, it is covered by Vaety+ Support in the first 30 days.

Bright lights make a screen hard to watch. A cinema scene can start when the TV powers on, lowering the lights to a comfortable level and bringing them back when the TV turns off.

Vaety links the TV power state to your lighting where the TV allows it. The scene is instant, because it runs locally.

Some TVs do not report their state to the system. In that case we use a button or a power sensor instead, and we test it on your TV.